Technical Support

If you are having trouble, not a problem! One of our Technical Support Specialists will make sure you are taken care of 100%. For tech support inquiries (including unfolding, installation/fitment, lighting/wiring, painting, or any other technical support), please fill out and submit the form below. Allow 1–2 business days for a response.

For damaged, defective, or incorrect parts, please file a claim here.

Otherwise, if you would instead like to proceed with a general return (buyer pays return shipping): login to your account, go to your orders page and click on “Request Return.” Note that general returns are only accepted within 60 days from delivery of the product.

Technical Support Request

Please select where you placed your order:

Verify Your Order

How do I find my order number?
Use zip code 92832 if your order was for local pickup.
✓ Order Verified Successfully

Note: All claim communication must be sent to the original email on the order. To request an exception, please request an email change here before filing your claim.

Enter the SKU number(s) or product title(s) above to select each part included in your tech support inquiry. If you purchased a full body kit, enter the SKU number or product title for each individual part you want included in your inquiry. For instructions on how to find each SKU number, click here.

Provide your vehicle information, including any trim options (ie. Nissan 350Z 2dr 2005).

To help troubleshoot the issue, please include your vehicle identification number (VIN).

What’s Needed?
  • Heat Source
  • KBD Body Kits Product
Warning: EXTREME CAUTION is needed when applying heat to form your product back to its original shape. Please read through this unboxing & unfolding guide thoroughly before proceeding. When applying heat, please be extremely cautious (as the heat you are applying is hot). Likewise, when the product has been heated, please use EXTREME CAUTION (because the product itself may then be extremely hot).
    Step 1: Unboxing. Take the KBD Body Kits product out of the box and place it to the side. Do not be alarmed that the product is in a folded fashion; the part will return to its original form. We fold most of our products, so they do not need to be shipped by freight. This saves our customers from paying the tremendous costs and having to deal with the inefficiencies of freight shipping.
      Step 2: Unfolding. This step can be done several different ways. Exposing the product to a heat source is the key to activating the memory agent within the material of the product, allowing the product to return to original form. We have found the following options are the best practices of returning a KBD Body Kits product to its original form:
        1. Option 1: Placing the product in the sun. If you are in a location where the temperature outside is relatively warm, then this option will be the easiest. Simply put the product outside in the direct sunlight and wait until the product has been fully formed back to its original shape. Using a hot ground placement for the product (such as asphalt) will help the process go faster. The time it takes for the product to return to its original shape greatly depends on how hot it is outside and how hot the ground is. We found this process to normally take 15-30 minutes, but it can take a few hours if the temperature outside is not as hot.
        1. Option 2: A body shop’s heated paint booth. Body shops commonly have heated paint booths, which help in the paint removal process. If your body shop has a heated paint booth, have your body shop place the KBD Body Kits product in the heated paint booth until the product has fully formed back to shape.
          But it’s cold outside and I don’t have access to a heated paint booth!   No problem. We have other solutions just for you. If you have access to a hair blow dryer, heat gun, or hot water - any of these items can help the product return to its shape. Just be careful, because these items can get extremely hot. USE EXTREME CAUTION!
            Step 3: Removing the KBD Body Kits product from the heat source. After the product has been heated and has formed back to its original shape, the product will be hot. Let the product sit for 10-15 minutes before handling (or until the product has cooled). Please USE EXTREME CAUTION as the product may be hot.

            Please include at least one photo showing the entire part (after heat has been applied). Be sure the photo(s) is clear and has bright lighting.

            Example

            Please include at least one close-up photo of the problematic unfolding area(s) (after heat has been applied). Be sure the photo(s) is clear and has bright lighting.

            Example

            Please include at least one photo showing the lighting installed. Be sure the photo(s) is clear and has bright lighting.

            Example

            Please include at least one photo showing the wiring. Be sure the photo(s) is clear and has bright lighting.

            Example
            What’s Needed?
            • Acetone
            • 3 x Clean Rags
            • Ajax With Bleach Powder Cleaner
            • Uneeda P-100400 Maroon (or equivalent) Coarse Scuff Pad
            • Water
            • Polyvance Bumper and Cladding Coat Adhesion Primer (Part #3601-4)
            • 400 Grit Sandpaper
              Warning: KBD Body Kits recommends professional installation and paint. This paint guide needs to be provided to the individual who is painting your KBD Body Kits product. Every automotive body shop has different painting experience levels. If they don’t have experience painting a KBD Body Kits product, they need to know these simple procedures for prepping a product. Prep-work is crucial to a great paint job (this is true for all body panels).
              KBD Body Kits recommends preparing products for paint using the following procedures:  
              1. Wet the 1st clean rag with acetone. Using very light pressure, wipe down the KBD Body Kits product with the acetone rag.
              2. Spread the Ajax With Bleach Powder Cleaner on a Uneeda P-100400 Maroon (or equivalent) coarse pad and clean the surface of the product thoroughly.
              3. Pour water on the KBD product in order to make sure the product has been cleaned properly. If the product has NOT been properly cleaned, the water will form into beads on the product. If the product HAS been properly cleaned, then the water will roll off in sheets. See examples below.
                Uncleaned example: In this example the product has not been cleaned yet. Notice the water forms into beads.
              Cleaned example: Once water rolls off in sheets, you are ready to proceed to the next step.
              1. Wet the 2nd clean rag with acetone. Using very light pressure, wipe down the KBD Body Kits product with the acetone rag.
              2. Once the product has been properly cleaned, apply Polyvance Bumper and Cladding Coat Adhesion Primer to the product.
              3. Sand the primed item using 400 grit paper until the item is even throughout.
              4. Wet the 3rd clean rag with acetone. Using very light pressure, wipe down the now-primed KBD Body Kits product with the acetone rag.
                Congratulations! You have prepared your KBD Body Kits product and you are now ready for paint!
                Beware of Fisheyes (“pinholes”): KBD Body Kits products are made using multi-sided molds. Before injecting the hot polyurethane (which forms the product), the inside of the mold is coated with a mold release.
                  This mold release prevents the product from sticking to the mold. When removing the formed polyurethane product from the mold, trace amounts of mold release is left on the surface of the product. These trace amounts of mold release must be cleaned off prior to painting.
                    It is important for the product to be thoroughly cleaned and prepared using our recommended procedures above. Failure to follow these procedures may result in Fisheyes or Pinholes, which is not covered by the KBD Body Kits Warranty Program. See the example below.

                    Please include at least one photo showing the entire part. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo of the painting issue. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Front Bumper Photos:

                    Please include at least one photo showing the entire front bumper held up to the car from the front. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the front, with the hood and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the driver's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the passenger's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the front bumper. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the support brackets installed underneath the bumper. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Front Lip Photos:

                    Please include at least one photo showing the entire front lip held up to the car from the front. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the front, with the hood and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front lip held up to the car from the driver's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front lip held up to the car from the passenger's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the front lip. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Front Air Dam Photos:

                    Please include at least one photo showing the entire front air dam held up to the car from the front. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the front, with the hood and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front air dam held up to the car from the driver's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front air dam held up to the car from the passenger's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the front air dam. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Rear Bumper Photos:

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear, with the trunk and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the driver's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the passenger's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the rear bumper. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Rear Lip Photos:

                    Please include at least one photo showing the entire rear lip held up to the car from the rear. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear, with the trunk and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear lip held up to the car from the driver's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear lip held up to the car from the passenger's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the rear lip. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Rear Diffuser Photos:

                    Please include at least one photo showing the entire rear diffuser held up to the car from the rear. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear, with the trunk and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear diffuser held up to the car from the driver's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear diffuser held up to the car from the passenger's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the rear diffuser. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Roll Pan Photos:

                    Please include at least one photo showing the entire roll pan held up to the car from the rear. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear, with the trunk and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire roll pan held up to the car from the driver's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire roll pan held up to the car from the passenger's side. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the roll pan. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Side Skirts Photos:

                    Please include at least one photo showing the entire side skirt(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire side skirt(s) held up to the car, with the hood, trunk, and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the side skirt(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Scoops Photos:

                    Please include at least one photo showing the entire scoop(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire side skirt(s) held up to the car, with the hood, trunk, and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the scoop(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Spoiler Photos:

                    Please include at least one photo showing the entire spoiler held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear, with the trunk and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the spoiler. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Wiper Cowl Photos:

                    Please include at least one photo showing the entire wiper cowl held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the wiper cowl. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Door Caps Photos:

                    Please include at least one photo showing the entire door cap(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the door cap(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Grill Inserts Photos:

                    Please include at least one photo showing the entire grill insert(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the grill insert(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Fender Louvers Photos:

                    Please include at least one photo showing the entire fender louver(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the fender louver(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Front Caps Photos:

                    Please include at least one photo showing the entire front cap(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the front cap(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Side Skirt Add-Ons Photos:

                    Please include at least one photo showing the entire side skirt add-on(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the side skirt add-on(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Fender Flares Photos:

                    Please include at least one photo showing the entire fender flare(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the fender flare(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Front Lower Bumper Photos:

                    Please include at least one photo showing the entire front lower bumper held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the front, with the hood and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the front lower bumper. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Side Skirt Extensions Photos:

                    Please include at least one photo showing the entire side skirt extension(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the side skirt extension(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Mesh Grille Photos:

                    Please include at least one photo showing the entire mesh grille held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the mesh grille. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Hood Scoop Photos:

                    Please include at least one photo showing the entire hood scoop held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the hood scoop. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Marker Lights Photos:

                    Please include at least one photo showing the entire marker light(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the marker light(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Running Lights Photos:

                    Please include at least one photo showing the entire running light(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the running light(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Lighting Package Photos:

                    Please include at least one photo showing the entire lighting package held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the lighting package. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Front Fenders Photos:

                    Please include at least one photo showing the entire front fender(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the front, with the hood and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the front fender(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Front Fenders Photos:

                    Please include at least one photo showing the entire front fender(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire front bumper held up to the car from the front, with the hood and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the front fender(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Rear Over Fenders Photos:

                    Please include at least one photo showing the entire rear over fender(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear, with the trunk and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the rear over fender(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Rear Fenders Photos:

                    Please include at least one photo showing the entire rear fender(s) held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire rear bumper held up to the car from the rear, with the trunk and all doors opened. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue on the rear fender(s). Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire part held up to the car. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo showing the fitment issue. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the part number on each part. This will be a 4 digit number written or engraved on the product. It may be preceded by "37-" and may end with ".1" ".2" ".3" or ".4." Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one photo showing the entire part with the issue. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Please include at least one close-up photo of the issue. Be sure the photo(s) is clear and has bright lighting.

                    Example

                    Provide a detailed description of your issue.

                    CAPTCHA image

                    This helps us prevent spam, thank you.